Easy Ways to Fix Minor Problems in your Vacuum Cleaner

DIY Tips for Vacuum Cleaner repair

Busy schedules leave little or no time to clean every corner of your home. Vacuum cleaners are a blessing for working professionals as these smart appliances not only save time but also remove germs from your home. With the advancement of technology, vacuum cleaners are equipped with HEPA filters that catch and trap contaminants from the surface. However, there may be instances when the vacuum cleaner may stop functioning. In such a scenario.

 5 Common Step How to Fix Vacuum Cleaner

  • Low Suction Force
  • Excessive Noise
  • Burning Smell
  • Hot Smoke or Air
  • Blowing Dusty Air

1. Low Suction Force

One of the common problems that a lot of people face is decreased suction. When you test for the suction issue, start with emptying the dust canister. The next step is to check the filters, brush roll, and hose. In case you find any obstructions, clean them out. However, if all these parts are clear and have no obstruction, it’s time to check the belt of the vacuum cleaner. When the brush roll is clean but it doesn’t spin or spin at a decreased speed, there may be a problem with the vacuum belt. The belts are not very expensive, and you can easily replace them.

2. Excessive Noise

Most vacuum cleaners make minimum noise for the convenience of the users. However, if your vacuum cleaner is making a lot of noise lately, there can be a number of reasons, such as blockage, air leaks, or problems with the motor, fan, or an obstructed hose. If a belt is detached, for instance, the vacuum cleaner makes a lot of noise. If the hose and belt are obstructed, there may be a problem with the motor of the vacuum cleaner. Motors get very noisy before the vacuum cleaners stop functioning.

You might be interested in 5 Essential Vacuum Cleaner Maintenance Tips for Optimal Performance

3. Burning Smell

Another common problem that a lot of people face with their vacuum cleaners is the burning smell. If you get a burning smell when vacuuming your home, there are chances that the belt needs to be replaced. The only way to deal with the issue is to replace the belt of the vacuum cleaner.

4. Hot Smoke or Air

A lot of times the vacuum cleaner may overheat and blow out hair air and smoke. In such a situation you need to stop vacuuming immediately as there may be an issue with the motor or an electrical problem. Avoid trying any DIY techniques to repair the vacuum cleaner in this case and replace the motor of the vacuum cleaner.

5. Blowing Dusty Air

The only reason for this problem is the canister is full and the vacuum cleaner doesn’t have space to store the dust that is collected. Empty the canister of the vacuum cleaner to avoid the problem. If this doesn’t fix the problem, you need to change the filter of the vacuum cleaner. Most vacuum cleaners come with washable filters, which reduces your hassles.

Last Few Words

Vacuum cleaners may stop functioning as a result of regular use. However, you always don’t need to take it to the service center. You can use the DIY techniques to resolve some of the small issues that the vacuum cleaner may have. However, if the motor of the vacuum cleaner malfunctions, it is necessary to replace the motor with the help of an expert.


Add a Comment

Your email address will not be published. Required fields are marked *