Kent Elite-II has a high purification capacity upto 50 litres/hour and is suitable for commercial establishments, offices, restaurants and homes. It is also suitable for online purification and attachment with water coolers.
Kent’s patented Mineral ROTM technology provides double purification of RO + UF, which removes even dissolved impurities such as chemicals and salts. The TDS controller maintains essential natural minerals, thereby providing 100% safe & tasty drinking water, which is ideal for consumption.
Kent Elite-II uses 4 numbers RO membranes and 2 high pressure pumps that allow high flow-rate of upto 50 litres/hour of purified water, thus making it possible to install with water coolers.
Unlike UV and only RO purifiers, Kent Mineral ROTM water purifiers remove dissolved impurities like chemicals, pesticides, rust, etc in water while retaining essential natural minerals that are required in drinking water
Kent Elite-II is tested and certified for its performance and quality by renowned laboratories of the world such as WQA in USA. WQA Gold Seal is one of the most recognized certification in the drinking water treatment industry and provides assurance that the products have been rigorously tested and comply with all the requirements of the testing standards. Kent Elite-II is also CE certified.
Kent Elite-II purifies water from different sources such as bore-wells, overhead storage tanks, water tankers and even municipal taps. Patented Mineral ROTM technology allows the user to adjust the TDS level of purified water and thus breaks the myth that RO purifier can only be used for raw water having TDS level greater than 500 ppm.
An optional hydrostatic storage tank of 8 or 20 litres capacity can be attached to Kent Elite-II. The hydrostatic tank ensures pressurized supply of purified water even in the absence of electricity or running tap water.
Kent Elite-II incorporates Filmtec RO membrane (A DOW Chemical Company product), the most trusted RO membrane brand in the world. The membrane has a long life and is less prone to fouling. It is highly efficient and effective for removal of bacteria, viruses and other dissolved impurities.
Fully automatic operation allows the purifier to begin purification whenever water level in the purified water storage tank falls below maximum, and stop when the tank is filled or when there is no inlet water supply. This ensures trouble free operation without the need of manual intervention.
First of its kind in the industry, RO membrane housing is spin-welded using the latest technology, which ensures high quality permanent joints. Welded housing also prevents tampering and improves membrane life.
All the fittings and components in the purifier are push (snap) fit to prevent leakages and wastage of water. Additional protection against leakages is built-in by using rubber O-Rings inside the push-fit fittings.
Kent Elite-II incorporates a built-in rugged SMPS (Switching Mode power supply) instead of a standard power adaptor. It is equipped to handle a wide range of input AC voltage (100 – 300 Volts) which enables the purifier to stay resilient towards frequent power fluctuations, a common problem in developing countries like India.
|USP||High purification capacity upto 50 litres/hour|
|Installation||For attachment with water coolers|
|Max. Duty Cycle||250 Liters/Day|
|Storage Tank Capacity||8/20 litres (Optional)|
|Filter Cartridges||Sediment, Activated Carbon, Carbon Block, UF, Post Carbon|
|Ro Membrane||Filmtec 1812-75 GPD (4 Nos)|
|UF Membrane||0.01 Micron|
|Min. Inlet Water Pressure||0.3 kg/cm2|
|Max. Inlet Water Pressure||3 kg/cm2|
|Input Voltage||100-300V AC (50Hz)|
|Operating Voltage||24V DC|
|Dimensions||L450 W260 H870 (mm)|
|Net Weight||27.50 kgs|
Installation, Warranty & After-Sales Service